So for a large number of instances you should consider using a Draft PolarArray instead, combined with a Part boolean operation.
The PartDesign patterns are not yet as optimized as their Draft counterparts. This ensures that a PartDesign Body always consists of a single, connected solid. Any shape in the pattern that does not overlap the parent feature will be excluded. You can change the order by dragging individual features in the list. If some of the selected features are additive and others subtractive, their order can have have an impact on the final result. AUTO CLICKER BY POLAR 2.1 FREE DOWNLOAD UPDATE
If the Update view checkbox is checked the view will update in real time.Specify the number of Occurrences (including the original feature).Specify the Angle to be covered by the pattern.
Check the Reverse direction checkbox to reverse the pattern. Select reference.: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view. Construction line #: A separate entry for each construction line in the sketch (idem). Horizontal sketch axis: The X axis of the sketch (idem). 
Vertical sketch axis: The Y axis of the sketch (idem).Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).If there are several features in the pattern, their order can be important.Right-click a feature in the list and select Remove from the context menu.Select a feature in the list and press the Del key.Select a feature in the Tree view or the 3D view.Right-click the PolarPattern object in the Tree view and select Edit PolarPattern from the context menu.Double-click the PolarPattern object in the Tree view.
The PolarPattern parameters task panel opens. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button. If there is a single Body it will be activated automatically. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. Select the Part Design → Apply a pattern → PolarPattern option from the menu. There are several ways to invoke the tool:. Optionally select one or more features in the Tree view or the 3D view. A slot-shaped pocket (B) made on top of a base pad (A, also referred to as support) is used for a polar pattern.
0 kommentar(er)
